Many Samsung problems start as a short message on the display, and a power reset sometimes clears a one-time glitch. If the code returns, the part behind it needs testing. Call the number on this page to be connected with a local appliance repair company in Bennett.

Range and cooktop problems
A burner that clicks and will not catch, an oven that never reaches temperature, a display that goes blank or a self-clean cycle that locks the door and stalls are the usual reasons for a call. Smell gas anywhere near the range and the only step is to get out and call 911.
Front-load washer wear
Front-loaders put stress on door gaskets, drain pumps, bearings and shock absorbers. Detergent residue, leftover moisture and overloaded drums are the usual aggravating factors over time. In this area, hard water also adds scale to inlet valves, which can slow filling and trigger water-supply codes on the display.
Newer Bennett homes, like the typical 2000 build, often have appliance garages, built-in panels and second-floor laundry, so ask the company how it will handle access and water protection.
Homes on the eastern plains often have large garages with spare refrigerators and chest freezers, and the cold or heat there can strain cooling systems. Tell the company where the unit sits.
Before you call in Bennett
Bennett sits above 5,000 feet. Gas burners lose input with altitude; the fuel gas code's rule of thumb derates appliances about 4 percent for every 1,000 feet above 2,000, so mention the elevation if a flame burns yellow or a dryer heats slowly.
If your dishwasher or ice maker scales up quickly, your water provider's quality report or a simple test strip will tell you how hard the water is.
Smell gas around a range or dryer? Don't flip switches or try to find the leak. Leave, call 911 from outside, then Colorado Natural Gas (1-800-883-3181), which serves Bennett.
A photo of the rating plate (model and serial number) saves time on the phone and on the first visit.
Because Bennett is farther from the core of the metro, scheduling can take a little longer, and some companies add a trip charge; ask when you call.
Nearby, the same kind of help is available in Aurora, Strasburg and Watkins.
Ordering parts
Common Samsung parts such as pumps, valves and sensors are often available quickly, while boards and sealed-system components may be ordered. Provide the model number from the label so the right version is quoted. A rear-panel board for one model may not match another, even in the same line.
Software and resets
A technician may reset or update settings as part of a repair, so ask what was changed. Some Samsung controls store cycle preferences and connectivity settings, which can return to defaults after a board replacement, so note your favorite settings before the visit begins and set them again afterward.
If you smell gas
Leave the house and call 911 from outside. Do not turn lights on or off, use a phone inside or try to find the leak. After responders and the gas utility have cleared it, a gas range or dryer should be checked by a professional before it is used again.
Samsung Appliance Repair questions in Bennett
Can I fix a gas range myself?
Can a cold garage affect a refrigerator?
Is this site a Samsung repair company?
Why will my front-load washer not drain?
More appliance repair services in Bennett
Samsung Appliance Repair nearby
Helpful guides
Sources
Last updated: