A gas burner that clicks without lighting usually has a dirty igniter, a clogged port or a weak spark module, while an electric burner that stays cold is more often a worn coil, a corroded receptacle or a bad switch. Call the number on this page to be connected with a local appliance repair company in Evergreen.

Knobs that stick or spin free
A knob that turns without engaging, sticks or will not pull off can mean a worn stem or a failing valve or switch behind it. Gas valves are not a home repair. Do not force a stuck gas knob; if it will not turn, leave it and describe the problem when you call in Evergreen.
Receptacles, the hidden culprit
An electric coil plugs into a receptacle that carries high current. Over time the contacts pit, blacken and loosen, which starves the coil and can melt the plug. If a coil works in one position and not another, the receptacle is a good suspect. Mention it when you call.
At higher elevations, gas burners can burn differently and water boils even lower. If a flame looks off, report it, and mention propane or long driveways so the company can plan the trip.
Coverage that might apply
A newer stove could still be under warranty, and some home plans cover appliance repairs. Check the terms before booking. Warranty work typically goes through the manufacturer's service network. When coverage has lapsed, independent local companies near Golden can quote the repair on its own. Mention it when you call.
Questions to ask
- Which burner and part failed?
- Why did it fail, and can it recur?
- What is the total including parts and labor?
- What does the repair warranty cover?
Good answers come quickly and in plain language. Short answers are fine, and a technician who explains the repair clearly is a good sign for the rest of the visit.
Gas smell: leave first
If you smell gas at the stove, do not use switches, a lighter or a phone inside. Get everyone out, call 911 from outside and then call the gas utility. Do not look for the source or tighten anything. A gas odor is an emergency, and nothing on this page outranks it.
Before you call in Evergreen
Evergreen sits above 7,500 feet. Gas burners lose input with altitude; the fuel gas code's rule of thumb derates appliances about 4 percent for every 1,000 feet above 2,000, so mention the elevation if a flame burns yellow or a dryer heats slowly.
the Evergreen Metropolitan District reports water hardness of typically about 30 mg/L, which the district calls slightly hard. That mineral content is what leaves scale in dishwashers, ice makers and washer valves over time.
If you ever smell gas near a range, oven or dryer, leave the house, call 911 from outside, then call your gas utility using the emergency number on your bill.
Note any error code on the display and when the problem started. It helps the company you're connected with bring the right parts.
Companies that take calls here usually also work in Golden, Conifer and Morrison.
Stove Repair questions in Evergreen
Why do my burners click constantly?
What does a yellow gas flame mean?
Does altitude affect my stove?
Why do spills damage a stove so much?
More appliance repair services in Evergreen
Stove Repair nearby
Helpful guides
Sources
Last updated: